Vacuum Ultraviolet Free-Electron Laser Photoionization Mass Spectrometry of Alpha-pinene Ozonolysis

\begin{document}$\alpha$\end{document}-pinene is the most abundant monoterpene that represents an important family of volatile organic compounds. Molecular identification of key transient compounds during the \begin{document}$\alpha$\end{document}-pinene ozonolysis has been proven to be a challenging experimental target because of a large number of intermediates and products involved. Here we exploit the recently developed hybrid instruments that integrate aerosol mass spectrometry with a vacuum ultraviolet free-electron laser to study the \begin{document}$\alpha$\end{document}-pinene ozonolysis. The experiments of \begin{document}$\alpha$\end{document}-pinene ozonolysis are performed in an indoor smog chamber, with reactor having a volume of 2 m\begin{document}$^3$\end{document} which is made of fluorinated ethylene propylene film. Distinct mass spectral peaks provide direct experimental signatures of previously unseen compounds produced from the reaction of \begin{document}$\alpha$\end{document}-pinene with O\begin{document}$_3$\end{document}. With the aid of quantum chemical calculations, plausible mechanisms for the formation of these new compounds are proposed. These findings provide crucial information on fundamental understanding of the initial steps of \begin{document}$\alpha$\end{document}-pinene oxidation and the subsequent processes of new particle formation.     

Ion chromatograph with three-dimensional printed absorbance detector for indirect ultraviolet absorbance detection of phosphate in effluent and natural waters

An ion chromatography system employing a low-cost three-dimensional printed absorbance detector for indirect ultraviolet detection towards portable phosphate analysis of environmental and industrial waters has been developed. The optical detection cell was fabricated using stereolithography three-dimensional printing of nanocomposite material. Chromatographic analysis and detection of phosphate were carried out using a CS5A 4 × 250 mm analytical column with indirect ultraviolet detection using a 255 nm light-emitting diode. Isocratic elution using a 0.6 mM potassium phthalate eluent combined with 1.44 mM sodium bicarbonate was employed at a flow rate of 0.75 mL/min. A linear calibration range of 0.5 to 30 mg/L PO₄³⁻ applicable to environmental and wastewater analysis was achieved. For retention time and peak area repeatability, relative standard deviation values were 0.68 and 4.09%, respectively. Environmental and wastewater samples were analyzed with the optimized ion chromatography platform and the results were compared to values obtained by an accredited ion chromatograph. For the analysis of environmental samples, relative errors of <14 % were achieved. Recovery analysis was also carried out on both freshwater and wastewater samples and recovery results were within the acceptable range for water analysis using standard ion chromatography methods.     

Mediated Generation of Conjugate Acid by UV and Blue Sensitizers with Upconversion Nanoparticles at 980 nm

NIR and UV exposure of systems comprising upconversion nanoparticles ( UCNP ) based on NaYF₄:Tm/Yb@NaYF₄, a sensitizer absorbing either in the blue or UV region, and an onium salt with weak coordinating anion resulted in formation of conjugate acid (con-H⁺). That was namely Ivocerin (di(4-methoxybenzoyl)diethylgermane), ITX (2-iso-propyl thioxanthone), anthracene, pyrene, rubrene, camphore quinone, and a strong fluorescent coumarin (1,1,6,6,8-pentamethyl-2,3,5,6-tetrahyhdro-1H,4H-11-oxa-3a-aza-benzo[de]anthracene-10-one). Quantification occurred by treatment with Rhodamine B lactone whose color switched to intensive red after photolytic formation of con-H⁺. Exposure with a NIR laser at 980 nm resulted in less con-H⁺ compared to 395 nm where all sensitizers absorb radiation. UCNP did not mainly interfered formation of con-H⁺. The different rates obtained in both experiments responsibly explain the failure and success to initiate polymerization of epoxides applying ether 980 nm or 395 nm excitation, respectively.     

ZrCdOx/SAPO-18双功能催化剂催化CO2加氢合成低碳烯烃性能

采用并流共沉淀法制备了不同Zr/Cd原子比(n_Zr/n_Cd)的ZrCdO_x金属氧化物,并与水热法制备的不同硅铝比(n_{SiO_(2})/n_{Al_(2}O₃))的片状SAPO-18分子筛物理混合制得ZrCdO_x/SAPO-18双功能催化剂,研究了其催化CO₂加氢直接合成低碳烯烃性能。采用透射电子显微镜(TEM)、X射线衍射(XRD)、N2吸附-脱附、CO₂程序升温脱附(CO₂-TPD)、NH3程序升温脱附(NH3-TPD)和X射线光电子能谱(XPS)对催化剂进行了分析。与单一ZrO2相比,引入CdO使得ZrCdO_x比表面积下降,当n_Zr/n_Cd=8时制备的Zr8Cd1氧化物呈现出无定形小颗粒状,Zr与Cd之间较强的协同作用使得Zr Cd Ox氧化物产生了更多的氧空位,有利于CO₂的吸附活化。通过对Zr8Cd1金属氧化物与SAPO-18(硅铝比0.1)的质量比、工艺反应温度、压力和空速对催化性能影响的考察,获得了最佳反应条件。研究还发现,当SAPO-18的硅铝比从0.1降为0.01时,Br?nsted酸含量降低,产物中烯烃/烷烃物质的量之比从18.6提高至37.2,但副产物CO含量迅速增加,低碳烯烃时空收率明显下降。     

Visible light induced tandem reactions: An efficient one pot strategy for constructing quinazolinones using in-situ formed aldehydes under photocatalyst-free and room-temperature conditions

A facile tandem route has been developed for constructing quinazolinones from various aminobenzamides and in-situ generated aldehydes. Visible light was found to play a dual role: first oxidizes the alcohol to the aldehyde and then facilitates its cyclization with o-substituted aniline. Furthermore, alcohols are perfect alternatives to aldehydes because they are greener, more available, more economical, more stable, and less toxic than aldehydes. The first reaction step continuously provides material for the second step, which effectively reduces loss through volatilization, oxidation, and polymerization of the aldehyde, while avoiding its toxicity. A variety of quinazolinones can be prepared in the presence of visible light without any additional photocatalyst. The developed synthesis protocol proceeds with the merits of mild conditions, broad substrate scope, operational simplicity, and high atom efficiency, with an eco-energy source under metal-free, photocatalyst-free, and ambient conditions.     

结晶氮化碳的制备与改性策略

石墨相氮化碳(g-C_3N_4)是最具代表性的二维有机聚合物半导体材料,其具有可见光响应性能、稳定化学结构和优良的生物相容性等优点,在环境和能源领域有非常广阔的应用前景。但是,普通g-C_3N_4材料的热聚合不完全,其体相和表面的缺陷多,因此光生载流子易复合,光催化活性不高。近年来,高活性结晶氮化碳(CCN)的研究得到了国内外学者的广泛关注。本文总结了目前CCN制备及其改性方法:5种代表性制备方法,包括传统熔盐法、预热熔盐法、固态盐法、溶剂法和质子化法;4种代表性CCN的改性方法,包括缺陷引入、形貌控制、单原子修饰和材料复合。文章重点介绍了 CCN制备原理、结构特征与光催化性能。最后,对CCN的制备与改性方法进行了评价,并对其研究方向进行了展望。     

用于宽谱带发射白色发光二极管的黄色荧光粉Sr8MgAl(PO4)7∶xEu2+的制备及发光性能

通过高温固相反应合成了一系列宽谱带发射黄色荧光粉Sr_8MgAl(PO_4)_7∶x Eu~(2+)(SMAP∶x Eu~(2+)),并对其物质结构、发光性能及其在白色发光二极管(WLED)领域的应用进行了探究。X射线衍射(XRD)测试结果表明,SMAP∶x Eu~(2+)系列荧光粉具有单斜结构和C2/m空间群,激活剂Eu~(2+)离子能够很好地进入SMAP基质中并占据Sr~(2+)离子的晶格位点。漫反射光谱分析显示SMAP基质属于宽带隙材料,带隙宽度为3.60 e V。此外,SMAP∶x Eu~(2+)具有较宽的激发范围(280～500 nm),对应于Eu~(2+)离子的4f~7→4f~65d~1跃迁;在380 nm近紫外光激发下,呈现出450～800 nm的多发光中心的非对称黄光发射,发射峰位于590 nm处。基于高斯多峰拟合结果,得到3个发光中心,分别位于528、600和680 nm。最后,将已制备的黄色荧光粉SMAP∶0.05Eu~(2+)与商业化蓝粉Ba Mg Al_(10)O_(17)∶Eu~(2+)混合涂覆到400 nm芯片上制得色温较好(3 344 K)、显色指数较高(90.1)的WLED。     

Rapid and label-free classification of pathogens based on light scattering,reduced power spectral features and support vector machine

The rapid identification of pathogens is crucial in controlling the food quality and safety. The proposed system for the rapid and label-free identification of pathogens is based on the principle of laser scattering from the bacterial microbes. The clinical prototype consists of three parts: the laser beam, photodetectors, and the data acquisition system. The bacterial testing sample was mixed with 10 mL distilled water and placed inside the machine chamber. When the bacterial microbes pass by the laser beam, the scattering of light occurs due to variation in size, shape, and morphology. Due to this reason, different types of pathogens show their unique light scattering patterns. The photo-detectors were arranged at the surroundings of the sample at different angles to collect the scattered light. The photodetectors convert the scattered light intensity into a voltage waveform. The waveform features were acquired by using the power spectral characteristics, and the dimensionality of extracted features was reduced by applying minimal-redundancy-maximal-relevance criterion (mRMR). A support vector machine (SVM) classifier was developed by training the selected power spectral features for the classification of three different bacterial microbes. The resulting average identification accuracies of E. faecalis,E. coli and S. aureus were 99%, 87%, and 94%, respectively. The overall experimental results yield a higher accuracy of 93.6%, indicating that the proposed device has the potential for label-free identification of pathogens with simplicity, rapidity, and cost-effectiveness.     

Differentiating bulk nanobubbles from nanodroplets and nanoparticles

History has shown that it is not as easy as one might think to differentiate between bulk nanobubbles and nanodroplets or nanoparticles. It is generally easy to detect colloids (i.e. something that looks different, e.g. scatters light differently than its surrounding solvent), but less easy to determine the nature of these colloids. This has led to misinterpretations in the literature, where nanodroplets or nanoparticles have mistakenly been assumed to be nanobubbles. In this paper, we review a multitude of experimental methods and approaches to prove the existence of bulk nanobubbles. We conclude that combinations of optical detection with physical perturbations such as pressure or ultrasound, or phase-sensitive holographic methods are the most promising and convenient approaches.     

真空紫外光电离质谱技术进展及其在快速分析中的应用

真空紫外光电离源(VUV-PI)是一种普适性的质谱软电离源,真空紫外光电离质谱谱图无碎片、易解析、灵敏度高,适合于在线快速分析。真空紫外光电离质谱根据分析对象不同可以直接采用单光子电离或添加掺杂剂实现化学电离,能实现气、液、固体分析,也可实现成像分析。该文介绍了真空紫外光电离源的电离原理、光源类型,分析了光电离质谱灵敏度的影响因素及其技术改进措施,并阐述了真空紫外光电离质谱技术在环境污染物、化工产物在线分析、国家安全分析以及生物医学分析中的相关应用研究。最后,总结了真空紫外光电离源的优缺点,并对真空紫外光电离技术在性能和应用方面的发展前景进行了展望。